Selkirk 283870 VP Pellet Pipe 3-Inch Thru-the-Wall Kit – Quantity 1

For pellet and corn appliances. Kit contains 3 in horizontal cap. 3 in 90 deg elbow. 3 in wall bracket. five 3 in 1 ft pipe lengths. 3 in tee with cleanout. 3 in wall thimble and 3 in pipe connector. System rated for flue temperatures up to 570 deg. Proven coupling joint connects in seconds to assure joint integrity. Gasketed joint design. Inner wall is 304 stainless steel. outer wall is paintable galvanized. Rolled-over male end eliminates sharp edges. 1 in clearance to combustibles. Removable tee cap for inspection and cleaning. Internal spacing bead assures uniform insulating air space between pipe walls. Meets UL-641 and UL-103.

• Appliance’s flue gases must not exceed 570 F
• Industry Best Warrantty Contact Selkirk For Details
• System Temperature Rating: 2100 Degrees F Maximum Test 10 Minutes
• Tested and Listed to UL-641 and UL-103 Standards
• Check Appliance Installation Instructions For Details
• Full Line Of Fittings And Full Range Of Pipe Lengths Increase Installation Flexibility
• Designed for horizontal installations only
• Vent system for pellet stove applications
• Includes the following: one 3 inch horizontal cap. one 3 inch 90 degree elbow. one 3 inch wall bracket
• System Temperature rating: 1400 F Degrees Maximum 60 Minutes
• 1 inch clearance to combustibles
• Also includes: five – 3 inch one foot pipe lengths. one 3 inch clean out. one 3 inch wall thimble and one 3 inch pipe connector